Our Advanced D9865H HD Rainier Cisco Subscription Receiver.
Did you know our receiver also receives FTA DVB-S, DVB-S2, Qpsk, 8psk, Mpeg-2 and Mpeg-4 SD & HD broadcasts? This gives you access to the whole C band Free To Air universe with hundred’s of channels at no extra cost. No need to buy another cheap FTA box that has problems receiving or playing FTA signals right. The D9865 is ROCK SOLID! The picture quality is AWESOME! and the commercial quality electronic construction lasts and lasts….
Click image for more receiver information
2. Our Lifeline Basic Programming Package.
Click image for more channel information
3. Our slave kit for your 4DTV to use it as a dish mover & polarity controller.
click image for more info…
ITS EASY AS 1-2-3
Get this all at a special discount price. Call 509-486-4137 for the order access code for this special offer.
Rainier Satellite THE ONLY C BAND HD PROVIDER OUT THERE!
Got the code from Rainier? Enter it here for our special offer.
Are you one of the FTA box users that seem to get a receiver that never works right on all or some channels no matter what you do?
Does your box exhibit these symptoms? Video stuttering , lockup , or freeze? Audio missing, or out of sync (lipsync)? Channel refuse to scan in? Box runs hot or reboots? Box dies prematurely and dealer offers little or no help? Tried updating firmware and it don’t update or bricks the box.
Does your dealer promise that these problems will be rectified in the next firmware release? Does the next firmware release cause same or new problems? Does your dealer announce there will be no more updates and your now stuck with that problematic box?
Does your dealer come out with a new model and promise the new model will fix all previous problems with his last model and do so much more, but never does?
Have you lived through all this time and time again? Are you tired of it?
If so then Rainier can provide the solution. Our Cisco D9865 model receiver does not have any of these problem that all other FTA boxes exhibit.
Let me tell you, I like everyone else have been through the problematic FTA merry go round for years just like you reading this now and was disgusted with it all. Once I got the Cisco D9865 these problems stopped. It just worked and worked well! I have been using the Cisco for well over 2 years now and very satisfied. The Cisco also offers the added benefit of Subscription C band Master TV that no FTA box can offer. More on the Cisco later.
So why does this happen with typical FTA boxes A-Z?
All the FTA boxes the FTA dealers sell are originally intended for use in a foreign country. They are not designed for North America’s TV signals and standards no matter what they may tell you. Your typical FTA dealer/seller looks for a product that will meet his needs and clients price range. One big restriction the FTA dealer faces is cost. He knows his clients will not spend the money to do it right. So he must settle. (This is where the problem begins) FTA dealers are small garage based businesses that dont have the money to invest in a ground up product built specifically for the North American Market to his specifications. So the FTA dealer/seller decides on this or that foreign pre made box depending on what will seem to work for him. He then brings it to market and begins sales. After a while his clients complain that this isn’t working right or that isn’t right. So he contacts the manufacturer or has someone write patches to the firmware to try to solve the issues. In the meantime it usually screws up the previous code and a new problem arises. So its back to trying to fix that problem and many times still trying to fix the original problem. Once again he releases an update and the scenario keeps repeating itself. After the dealer/seller exhausts all his resources and the manufacturer / coder says it cannot be fixed no matter what, he drops support for the box. And you the consumer is left out in the cold.
After support is dropped the dealer /seller starts this game over again looking for another FTA box to fill the sales void. He still has the financial restraints to work with so the scenario repeats itself once again and the consumer loses again. Round and round the cycle goes.
Now back to the Cisco D9865. Why is it different? One of the things many overlook is that the Cisco D9865 is designed for the North American TV Market. It uses the same engine that is used in the commercial receivers/decoders used in your typical Cable and Satellite headend to deliver those services. It’s firmware has already been designed to work right and must no matter what it receives. Any future updates are done automatically over the satellite, so you don’t risk the chance of bricking the receiver with USB or internet update. Cost factor (the failure of typical FTA boxes) was not an issue when it was done so it is done right. But there is a tradeoff – it costs more than your typical FTA receiver upfront. Quality does not come free as many may keep believing. You need to ask yourself this question? Do I want to keep playing this FTA low price game buying your typical $100-$400 FTA receiver over and over just to replace it in 6 months to a year? OR Do I want to spend a little more once and be done with this merry go round once and for all? If you add up what you spent on many FTA bug-ridden receivers over a few years you can very easily own the Cisco D9865 and have change left over. Its your money how do you choose to spend it?
Short on cash? You can pay it off over time with our financing through Paypal Credit.
I hope this clears up what really happens behind the scenes and why that typical FTA box keeps giving you fits.
If your ready to upgrade and finally be happy, get the Cisco D9865 and sit back and enjoy the TV you want to watch for a change without frustration.
